Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu
Recent Submissions
-
Strength Classification of Wooden Chairs under Cyclic Loads Based on an Experimental Study
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)This study aimed to assess the cyclic load capacity of wooden chairs and subsequently categorize them based on their performance. A diverse selection of chair models was randomly procured from commercial markets. These ... -
The Use of Herbal Extracts in Lacquer Paint Coloring and Determination of Some Mechanical Resistance Properties on Wood-Based Surfaces
(Universidad del Bio-Bio, 2023)The aim of this study was to determine the usability of selected natural dye extracts as environmentally friendly colorants that are used in painting of MDF based furniture and evaluate their resistance to scratch resistance, ... -
Mechanical and thermal properties of polyvinyl acetate foams reinforced with biopolymers
(SAGE Publications Ltd, 2023)The study developed and designed polyvinyl acetate (PVAc) foams using advanced freeze-drying technology, which exhibited good heat-insulating ability, flame retardancy, and mechanical properties. Different combinations of ... -
Coloration of Lacquered Coatings for Furniture Production with Herbal Dyes and Determining Weathering Resistance
(Journal Drvna Industrija, 2023)The main goal of the study is to produce eco-friendly furniture dyes by using bio-colorants and to determine the color stability of these dyes in outdoor conditions. In this regard, dye extracts obtained from red beet (Beta ... -
Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species
(ZAGREB UNIV, 2023)The aim of this study was to investigate the effect of wood species, heat treatment, adhesive type and joint technique on shear force capacity of H-type furniture joints. For this purpose, an experimental design that ... -
Optimization of the Cross-Sectional Geometry of Auxetic Dowels for Furniture Joints
(PMC, 2023)In this study, the aim was to optimize the cross-sectional geometry of auxetic dowels for furniture joints. For this purpose, two different sizes of auxetic dowels were chosen, one for frame- and the other for panel-type ... -
Investigation of some physical and mechanical properties of wood coated with plant-oil based epoxide nanocomposite materials
(Elsevier B.V., 2023)Some mechanical and physical properties of wood from the Oriental beech (Fagus orientalis L.) coated with bio-based epoxide amine nanocoatings were investigated in this study. Firstly, plant oil-based epoxide (ETO) was ... -
Determination leaching of boron from Oriental beech wood coated with polyurethane/polyurea (PUU) hybrid and epoxy (EPR) resins
(Associacao Brasileira de Polimeros, 2022)In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ... -
A Study on Physical, Morphological and Antibacterial Properties of Bio Polymers Reinforced Polyvinyl Acetate Foams
(UNIV FED SAO CARLOS, DEPT ENGENHARIA MATERIALS, 2022)In this study, foaming-agent free novel polyvinyl acetate (PVAc) foams reinforced with bio polymers were manufactured through freeze-drying technique. The physical, morphological and antibacterial properties of foams which ... -
Determination of wood characteristics of Pinus brutia Ten. infested with Marchalina hellenica Genn.
(Taylor and Francis Ltd., 2022)The aim of this study was to examine the chemical, anatomical, physical, and mechanical properties of Marchalina hellenica Genn.-infested Pinus brutia Ten. wood. Studies were carried out on wood samples taken from uninfested ... -
Some additional fields in this record are shown in regional languages from the following databases
(ASSOC BRASIL POLIMEROS, 2022)In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ... -
MECHANICAL AND FIRE PROPERTIES OF ORIENTAL BEECH IMPREGNATED WITH FIRE-RETARDANTS AND COATED WITH POLYUREA/POLYURETHANE HYBRID AND EPOXY RESINS
(UNIV BIO-BIO, 2022)This study was performed to investigate some mechanical properties such as modulus of rupture and compression strength parallel to grain and some fire properties such as weight loss and temperature values of Oriental beech ... -
SOME SURFACE CHARACTERISTICS OF ORIENTAL BEECH WOOD IMPREGNATED WITH SOME FIRE-RETARDANTS AND COATED WITH POLYUREA/POLYURETHANE HYBRID AND EPOXY RESINS
(Universidad del Bio-Bio, 2021)This study was made to determine surface characteristics such as colour, gloss, and surface hardness changes of Oriental beech (Fagus orientalis). The wood specimens were firstly impregnated with some fireretardants(FRs) ... -
Improvement of technological properties of wood plastic composites reinforced with glass and carbon fibre fabric
(SAGE Publications Ltd, 2021)In this study, HDPE-based flat-pressed WPCs were reinforced with glass fibre and carbon fibre woven fabrics, which could be used where high strength and stiffness are required. The effect of reinforcement on some physical, ... -
Analysis of the internal mounting forces and strength of newly designed fastener to joints wood and wood-based panels
(MDPI, 2021)This study aimed to numerically and experimentally analyze the effects of internal mounting forces and selected materials on the stiffness and bending moment capacity of L-type corner joints connected with novelty-designed ... -
Increasing the physical and combustion performance of Oriental beech by impregnating borates and coating liquid glass
(ASSOC BRASIL POLIMEROS, 2021)This study was designed to investigate physical properties such as color changes after weathering and water absorption (WA) levels, and combustion performance of borates-impregnated and LG-coated Oriental beech wood. Results ... -
COMPARISON OF SOME WOOD PROPERTIES OF JUVENILE BLACK PINES OF DIFFERENT ORIGIN PLANTED IN THE SAME HABITAT
(Universidad del Bio-Bio, 2021)Black pine (Pinus nigra) is a significant raw material source for the forest products industry in Turkey. The purpose of this research was to study some chemical, anatomical, physical, and mechanical properties of wood ... -
Fire-retardant bioproducts for green buildings
(WOODHEAD PUBL LTD, 2020)Green buildings are environmental-friendly designs that use site, energy, water, and all other resources efficiently. The increased awareness and related regulatory amendments produce an increase in green building activity. ... -
WEATHERING CHARACTERISTICS OF IMPREGNATED AND COATED CALABRIAN PINE WOOD
(Universidad del Bio-Bio, 2021)This study was designed to investigate the weathering characteristics of Calabrian pine (Pinus brutia) wood. The wood specimens were impregnated with some copper-based chemicals and then varnish coated. As copper-based ... -
EFFECTS OF MICROCRYSTALLINE CELLULOSE ON SOME PERFORMANCE PROPERTIES OF CHITOSAN AEROGELS
(Universidad del Bio-Bio, 2021)The aim of this research was to investigate the effect of the microcrystalline cellulose reinforcement on some physical, mechanical, thermal, and morphological properties of the chitosan aerogels. The bio-based chitosan ...
RSS 1.0
