Güncel Gönderiler: Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu
Toplam kayıt 109, listelenen: 61-80
-
Some physical, wood polymer biological, mechanical, and fire properties of composite (WPC) pretreated with boric acid and borax mixture
(Elsevier Sci Ltd, 2007)Wood polymer composite (WPC) was obtained by vinyl monomers such as styrene (ST), methylmethacrylate (MMA), and their mixture (50:50; volume:volume) of treated sapwood of Scots pine (Pinus sylvestris L.). Boric acid (BA) ... -
Determination of the color stability of an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) leaf extracts under UV exposure
(Forest Products Soc, 2008)This study was designed to develop an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived ... -
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ... -
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ... -
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ... -
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ... -
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ... -
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
(Forest Products Soc, 2009)Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate ... -
Some combustion parameters of wood impregnated with borates
(Forest Products Soc, 2009)This study was conducted to determine some of the combustion parameters of Calabrian pine and Oriental beech treated with borates. Average mass loss and temperature values of Calabrian pine and Oriental beech wood were ... -
Surface characteristics of wood pre-impregnated with borates before varnish coating
(Forest Products Soc, 2009)Some surface characteristics of Calabrian pine (Pinus brutia Ten) pre-impregnated with borates before varnish coating were studied. Boric acid, borax, and sodium perborate were used as borates. An alkyd-based synthetic ... -
Effects of the Traditional Turkish Art of Marbling (Ebru) Techniques on the Adhesion, Hardness, and Gloss of Some Finishing Varnishes
(Forest Products Soc, 2010)The aim of this study was to determine the effects of ebru, a traditional Turkish art of marbling, on some physical properties of various varnishes. Scots pine (Pinus sylvestris L.), Turkish oriental beech (Fagus orientalis ... -
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ... -
Some mechanical properties of wood impregnated with environmentally- friendly boron and copper based chemicals
(Slovak Forest Products Research Inst, 2013)The aim of this study was made to determine some mechanical properties such as compression strength parallel to grain (CSPG), modulus of rupture (MOR), and modulus of elasticity (MOE) of wood treated with some boron and ... -
Natural Fiber Blend-Nylon 6 Composites
(Wiley-Blackwell, 2013)In this study, engineering thermoplastic composites were prepared from natural fiber blendfilled nylon 6. Natural fiber blend from a mixture of kenaf, flax, and hemp fibers were added to nylon 6 using melt mixing to produce ... -
Surface properties of impregnated and varnished Scots pine wood after accelerated weathering
(Wiley, 2014)In this study, the effect of accelerated weathering on the surface properties of Scots pine specimens impregnated with wolmanit-CB, tanalith-E, and adolit-KD5 and coated with synthetic and polyurethane varnishes was ... -
SOME PHYSICAL CHARACTERISTICS OF THERMALLY MODIFIED ORIENTAL-BEECH WOOD
(Univ Bio-Bio, 2014)Heat treatment of Oriental-beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 4, and 8 h at 140, 170, and 200 degrees C. After heat treatment, some physical characteristics such as surface roughness, ... -
SOME PROPERTIES OF TURKISH SWEETGUM BALSAM (STYRAX LIQUIDUS) IMPREGNATED ORIENTAL BEECH WOOD PART I: PHYSICAL PROPERTIES
(Slovak Forest Products Research Inst, 2015)The purpose of this study was to investigate some physical properties such as water absorption (WA), color, gloss, and surface hardness changes of Oriental beech (Fagus orientalis L.) wood impregnated with Turlcish sweetgum ... -
Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood
(Zagreb Univ, Fac Forestry, 2015)This study was designed to determine some physical properties such as surface roughness and oven dry density, and some mechanical properties such as modulus of elasticity (MOE) of borate-treated wood specimens. Wood specimens ... -
RESEARCH ON THE USAGE OF ANTIFUNGAL AND ANTIBACTERIAL PROPERTIES OF INDIGO (INDIGOFERA TINCTORIA L.) COLORANT USED AS A WOOD PRESERVATIVE
(Slovak Forest Products Research Inst, 2015)In this study the antifungal and antimicrobial property of plant extracts from indigo was determined when used as a wood preservative. The extract was dissolved from Indigofera tinctoria L. by using an ultrasound assisted ... -
DECAY RESISTANCE, PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF HEATED ORIENTAL BEECH WOOD
(Slovak Forest Products Research Inst, 2015)Heat treatment of Oriental beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 6, and 10 h at 125, 155, and 185 degrees C. After heat treatment; decay resistance, oven dry density, modulus of rupture ...
