Güncel Gönderiler: Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu
Toplam kayıt 109, listelenen: 81-100
-
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ... -
CRISIS MANAGEMENT AND RECOMMENDATIONS IN THE WOODWORKING SECTOR
(Pressacademia, 2016)In today's world, the survival of the enterprises is becoming more and more difficult in the face of the escalating and changing competition. In the modern-day competitive environment, fast changes in the environmental ... -
QUALIFICATIONS SOUGHT IN TECHNICAL EMPLOYEES BY SME BUSINESSES (FURNITURE INDUSTRY SAMPLE)
(Pressacademia, 2016)Nowadays, businesses are increasingly in need of employees who can adopt changing conditions in order to be able to enhance competitive capacity, who can understand technological applications and can use the same, who are ... -
SURFACE CHARACTERISTICS OF ORIENTAL BEECH AND SCOTS PINE WOODS HEAT-TREATED ABOVE 200 degrees C
(Slovak Forest Products Research Inst, 2016)Heat-treated of Oriental beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods were carried out by hot air in an oven for 1, 3, and 5 hours at 205, 220, and 235 degrees C. After heat treatments, some surface ... -
IMPROVING MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MADE FROM VINE (VITIS VINIFERA L.) PRUNINGS BY ADDITION REINFORCEMENT MATERIALS
(Slovak Forest Products Research Inst, 2016)The main goal of this study was to improve mechanical and physical properties of particleboards made from vine (Vitis vinjfera L.) prunings by addition of reinforcement materials. In Turkey, there are 462.000 hectare areas ... -
FIRE RESISTANCE PERFORMANCE OF WOOD MATERIALS COLORED WITH ECO-FRIENDLY POMEGRANATE SKIN (PUNICA GRANATUM) EXTRACTS
(Slovak Forest Products Research Inst, 2016)The main goal of this study was to determine fire resistance properties of wood treated with pomegranate extract and mordant mixes. According to that wood materials Scotch pine (Pinus sylvestris L.), Oriental beech (Fagus ... -
DETERMINATION OF ANTIFUNGAL AND ANTIBACTERIAL ACTIVITIES OF NATURAL DYE OF POMEGRANATE SKIN (PUNICA GRANATUM L.) IMPLEMENTED ON WOODEN MATERIALS
(Slovak Forest Products Research Inst, 2016)The demand for partially harmless dyes produced from natural sources as an alternative to synthetic dyes has been increasing. Natural dyes environment and they are attractive materials contributing to the protection of ... -
Mechanical Properties of Externally Invisible Furniture Joints Made of Wood-Based Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2016)The aim of this investigation was to design and determine the mechanical properties of innovative, externally invisible, 3D-printed cabinet furniture joints that can be assembled without the use of tools. The cognitive ... -
Potential of ultrasonic pulse velocity for evaluating the dimensional stability of oak and chestnut wood
(Elsevier, 2016)The objective of this study was to examine the potential of ultrasonic velocity as a rapid and nondestructive method to predict the dimensional stability of oak (Quercus petraea (Mattuschka) Lieblein) and chestnut (Castanea ... -
THERMAL ANALYSIS OF ORIENTAL BEECH WOOD TREATED WITH SOME BORATES AS FIRE RETARDANTS
(Univ Bio-Bio, 2016)Wood is widely used as a construction material for many applications. To have knowledge about the thermal degradation characteristic of wood could be crucial for indoor and outdoor applications. Chemical treatments could ... -
Thermal Analysis of Polyamide 6 Composites Filled by Natural Fiber Blend
(North Carolina State Univ Dept Wood & Paper Sci, 2016)This study describes changes in the viscoelastic and thermal properties of composites made with various percentages (up to 20 wt.%) of a natural fiber blend (a mixture of flax, kenaf, and hemp fibers) and polyamide 6 (PA ... -
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ... -
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ... -
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ... -
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
(North Carolina State Univ Dept Wood & Paper Sci, 2017)Particleboard can be defined as a wood-based panel produced under pressure and heat with the inclusion of wood particles or other lignocellulosic materials and an adhesive. The need for alternative resources to replace ... -
WEATHERING PROPERTIES OF SCOTS PINE TREATED WITH SOME CHEMICALS
(Slovak Forest Products Research Inst, 2017)This study was aimed to investigate the gloss, surface hardness, surface roughness, and color changes of Scots pine that was treated with some chemicals after six months of weathering exposure. Chromated copper boron (CCB), ... -
Withdrawal Force Capacity of T-Type Furniture Joints Constructed from Various Heat-treated Wood Species
(North Carolina State Univ Dept Wood & Paper Sci, 2017)The withdrawal force capacities were compared for T-type furniture joints made from heat-treated Siberian pine (Pinus sibirica), iroko (Chlorophora excelsa), and common ash (Fraxinus excelsior), which are commonly used in ... -
SURFACE CHARACTERISTICS OF SCOTS PINE WOOD HEATED AT HIGH TEMPERATURES AFTER WEATHERING
(Slovak Forest Products Research Inst, 2017)This study was conducted to investigate some surface properties of wood specimens of heat treated Scots pine (Pinus sylvestris L.) after weathering such as surface hardness, surface roughness, gloss, and color changes. ... -
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ... -
DETERMINATION OF LEACHING FEATURES OF WOOD SURFACES COLORED BY ECO-FRIENDLY RED BEETROOT (BETA VULGARIS) EXTRACT
(Slovak Forest Products Research Inst, 2018)The aim of this study to develop an eco-friendly wood stain and to determine the adsorption and desorption on surfaces. In this context; plant dyestuff was extracted from the red beetroot by using ultrasonic assisted method ...
